Easy Programming of Complex Multi-tasking Mill/Turn Machine Tools
The 2014 version of FeatureCAM software from Delcam includes new options for turning, four-axis rotary machining and turn-mill operations, along with more strategies for two-axis finishing and easier programming of probing sequences.
Delcam International Inc. (Windsor, ON) offers the 2014 version of its FeatureCAM feature-based CAM software that includes new options for turning, four-axis rotary machining and turn-mill operations, along with more strategies for two-axis finishing and easier programming of probing sequences.
The first improvement to turning in FeatureCAM 2014 adds fillets to any sharp corners, for example, for automatic deburring, without having to edit the geometry. Simply specify the radius to be applied and all the sharp corners will be filleted automatically. Similar functionality for automated chamfering of corners has been available in FeatureCAM for several years.
Turning simulation is more realistic with the ability to program and simulate the movements of the steady-rest that can be used to position large parts during turning and the tailstock that can be used to hold long parts on centre during machining. Collision detection against both these types of accessory is undertaken automatically during both cutting and transfer operations.
Programming of both turn-mill and four-axis equipment has been made much easier with the ability to change the index axis part-way through programming. Previously, all aspects of the part, including features, geometry and curves, would have to be moved if a change in the index axis was required. Now this can be achieved simply by creating a new user coordinate system and using that as the new index axis.
Discover the essentials of programming parts with Delcam FeatureTURN, the turning module for FeatureCAM.
An improvement to the FeatureCAM interface makes it easier to use a curve to define start points and plunge points for both turning and milling. Users can now pick these curves by clicking on them, instead of having to type the name of the curve.
Incorporate probing routines into machining programs was added in FeatureCAM 2013 to make it easier to undertake unsupervised production operations by allowing automated checks to be carried out before, during and after machining.
Programming of these operations is now easier and quicker with the new ability to incorporate decision-making with built-in options in the software, instead of having to hand-write toolpath edit commands. For example, it is now easier to include a re-machining command if the probing results show that more material needs to be removed from the part.
Extra strategies and options have been added for two-axis finishing, including the ability to use larger stepovers with automatic machining of any upstands that may be left, continuous spiral machining either from outside to inside or inside to outside, support for stock models created from roughing toolpaths, and automatic avoidance of clamps. www.delcam.com