Laser Micrometer Interface Streamlines Setup And Operation

LaserLinc's NetLinc interface streamlines the setup process by enabling transmission of measurement data via a standard Ethernet cable.

LaserLinc (Fairborn, OH) has developed the NetLinc™ laser micrometer interface. The NetLinc interface streamlines the setup process by enabling transmission of measurement data via a standard Ethernet cable.

Simply plug one end of the cable into any PC, laptop, or all-in-one box running Total Vu™ software, and the other into the NetLinc micrometer’s Ethernet port. The NetLinc interface can also connect a micrometer to plant networks, streaming the data to a Total Vu PC via standard Ethernet TCP/IP.

Connectivity of the NetLinc interface is incorporated directly into most LaserLinc micrometers. To use the NetLinc interface with existing LaserLinc micrometers, you can add an external box.

LaserLinc’s TLAser230™ laser scan micrometer with internal NetLinc™ laser micrometer interface and external NetLinc interface box showing connector panel. The external box measures 6.7 in (172 mm) wide x 2.5 in (64 mm) high x 8.7 in (221 mm) deep; dimensions for the internal NetLinc interface varies for the micrometer inside which it is mounted.

www.laserlinc.com

0 Comments



Current ye@r *

Events Calendar
September 8 - 13, 2014
McCormick Place -- Chicago, IL
September 10 - 11, 2014
Miller and Hobart Technology and Training Center -- Houston, TX
September 15 - 17, 2014
San Diego Convention Center -- San Deigo, CA
September 16 - 18, 2014
Houston, TX
September 17 - 18, 2014
John S. Knight Center -- Akron, OH