Mazak Webinar Links CAM Software and Multi-Tasking Efficiency 

Derek Patrick, ESPRIT application engineer for DP Technology, will present this Mazak webinar titled “Process Planning for Improved Multi-Tasking Machining.”

Mazak (Florence, KY) will host a free webinar on Tuesday, Feb. 18 at 2 p.m. ET that will explore the role CAM software plays in process planning and optimizing mill-turn operations.

Derek Patrick, ESPRIT application engineer for DP Technology, will present this Mazak webinar titled “Process Planning for Improved Multi-Tasking Machining.” He will discuss how process planning via full-spectrum CAM software can take the complexity out of multi-tasking machining so manufacturers can produce parts easier and more efficiently.

By the end of the 30-minute webinar, participants will be able to evaluate different machining scenarios and determine which one is the most efficient for their shop, understand how to coordinate multiple operations for maximizing machine uptime, calculate the average working diameter for OD and ID operations to determine if the two are a good match for simultaneous turning on the same spindle, use synchronization codes to coordinate simultaneous machining operations and perform a time study analysis for evaluating a complete machining process.

Registration for the free “Process Planning for Improved Multi-Tasking Machining” is now open here. Once registered, all it takes to participate is a computer, an Internet connection and a web browser.

www.mazakusa.com

0 Comments



Current ye@r *

Events Calendar
September 8 - 13, 2014
McCormick Place -- Chicago, IL
September 10 - 11, 2014
Miller and Hobart Technology and Training Center -- Houston, TX
September 15 - 17, 2014
San Diego Convention Center -- San Deigo, CA
September 16 - 18, 2014
Houston, TX
September 17 - 18, 2014
John S. Knight Center -- Akron, OH