Danray’s Steel Lathe Chuck Shields are OSHA and ANSI Compliant

Danray Products offers 52 in and 62 in steel lathe chuck shields for lathes or similar machines.

Danray Products LLC (Rockford, IL) offers 52 in and 62 in steel lathe chuck shields for lathes or similar machines. These heavy-duty 12-gauge steel lathe chuck shields provide a safeguard between individuals and point-of-operation or rotating hazards and protect individuals from flying chips, sparks, coolant, lubricant, and other particles.

The mounting bracket attaches to the face of the headstock. The vertical shield hinges like a door, making it easy to change or adjust the chuck or workpiece. The operator doesn’t need to reach in close to the chuck when opening and closing the shield.

The shield design allows the shield to be hinged either left or right, so the shield can be used on the front or back of the machine to safeguard the chuck. These shields comply with OSHA 29 CFR 1910.212 and the ANSI B11.6 safety standard for lathes.

www.danrayproducts.com

0 Comments



Current ye@r *

Events Calendar
September 8 - 13, 2014
McCormick Place -- Chicago, IL
September 10 - 11, 2014
Miller and Hobart Technology and Training Center -- Houston, TX
September 15 - 17, 2014
San Diego Convention Center -- San Deigo, CA
September 16 - 18, 2014
Houston, TX
September 17 - 18, 2014
John S. Knight Center -- Akron, OH