Home / Exploring Part Deviation with Surface Plate Measurement

Exploring Part Deviation with Surface Plate Measurement

The Millimar C1200 from Mahr Federal is a low-cost, easy-to-view and easy-to-use Digital IC Amplifier with a new high resolution, high color contrast display that provides clear and very responsive analog readings with selectable scales.

Posted: April 8, 2016

The Millimar C1200 from Mahr Federal uses a digital display to produce the smooth motion of an analog meter. Users can view the analog scale, numeric digital readings, or both. Display range is ±5000 µm and reading resolution 0.1 µm. The display may be adjusted to the ideal viewing angle (0 deg to 90 deg) and the C1200 unit can also be wall-mounted.

Mahr Federal Inc. (Providence, RI) has introduced the Millimar C1200, a new low-cost easy-to-view and easy-to-use Digital IC Amplifier. Incorporated in the C1200 is a new high resolution, high color contrast display that provides clear and very responsive analog readings with selectable scales. Users can view the analog scale, numeric digital readings, or both. Display range is ±5000 µm and reading resolution 0.1 µm. The display may be adjusted to the ideal viewing angle (0 deg to 90 deg) and the C1200 unit can also be wall-mounted.

“A major design goal of the new C1200 was to produce a digital display that would produce the smooth motion of an analog meter,” said George Schuetz, the director of precision gages for Mahr Federal. “This fast response is ideal for exploring part deviations, common with surface plate measurement applications.”

The C1200 is powered by five standard “AA” cell rechargeable batteries, or by external power supply. When battery operated, the compact lightweight unit (<1.4 lb) is fully portable for use anywhere. Single probe input using “Mahr” probe specification accommodates standard or long-range inductive probes. Data output is available using MarConnect cables for Digimatic, Opto-RS 232, or USB interface. Output type is auto-sensed by the cable connected to it. External wireless may also be used.

Operating features are set up using an integrated 5-button keypad. Features such as unit selection (in/mm/µm), normal/reverse polarity, measuring range, preset, factor, and tolerance entry are easily set up by visual menu options. When tolerances are used the display shows pass/fail status using green/red color on the backlit display. The Millimar C1200 model replaces the 1200IC amplifier.

Mahr Federal, a member of the Mahr Group, has been providing dimensional measurement solutions to fit customer application needs for over 150 years. The company manufactures and markets a wide variety of dimensional metrology equipment, from simple and easy-to-use handheld gages to technically advanced measurement systems for form, contour, surface finish and length. Mahr Federal is also well known as a producer of custom-designed gages and a provider of calibration and contract measurement services. Mahr Federal’s calibration laboratories are accredited to ISO/IEC 17025:2005 NVLAP Lab Code 200605-0 (see our Scope of Accreditation for accredited calibration processes).

Mahr Federal Inc., 1144 Eddy Street, Providence RI 02905, 401-784-3100, Fax: 401-784-3246, information@mahr.com, www.mahr.com.