In-Process Grinding Gauge for Smooth Part Monitoring
The flat, compact P1dME gauge amplifier from Marposs mounts inside the operator panel of any grinding machine or as a stand-alone unit for continuous measurement that assures part production stays within tolerance and the machining cycle is optimized based on the amount of stock being removed.
Posted: May 10, 2017
In Booth 3008, Marposs Corporation (Auburn Hills, MI) will present their P1dME electronic gauge amplifier for smooth part monitoring of grinding applications. The device, intended for connecting to Marposs measuring heads, represents an economical, compact, and reliable solution for in-process ID/OD workpiece monitoring on grinding machines. With this system, the part is continuously measured during the grinding process to assure that part production is within tolerance and the machining cycle optimized based on the amount of stock being removed. The flat and compact P1dME gauge amplifier can be easily installed inside the operator panel of any grinding machine or set up as a stand-alone unit. It features a 4.3 in touchscreen with an intuitive, easy-to-use operator interface. Its robust housing is designed to withstand harsh shop floor environments and resist abrasive grit, metallic particles, and cutting fluids.
Depending upon the chosen measuring head, the P1dME has a measuring range of ±250 µm, ±500 µm or ±1,000 µm. These in-process applications are designed so that they are not affected by varying machine conditions (temperature variations, cold start-up, vibrations, etc.).
Marposs Corporation, 3300 Cross Creek Parkway, Auburn Hills, MI 48326, 248-370-0404, marposs@us.marposs.com, www.marposs.com.
Subscribe to learn the latest in manufacturing.
Industry News
