Home / How to Cure Paint on Steel and Aluminum Test Coupons

How to Cure Paint on Steel and Aluminum Test Coupons

Take a closer look at how a No. 843 gas-heated cabinet oven from Grieve is currently being used for curing paint on steel and aluminum test coupons at one of their customer facilities.

Posted: September 6, 2017

Featuring a 12 in wide x 8 in high door installed in main door, this No. 843 gas-heated cabinet oven from Grieve can reach 850 deg F inside workspace dimensions of 20 in W x 20 in D x 20 in H, with 6 in insulated walls. It uses a 100,000 Btu/hr modulating gas burner and has a 600 cfm, ½ hp recirculating blower for horizontal airflow to the workload. It also has an aluminized steel exterior and Type 430 stainless steel interior.

A No. 843 gas-heated cabinet oven from The Grieve Corporation (Round Lake, IL) is currently being used for curing paint on steel and aluminum test coupons at one of their customer facilities. The workspace dimensions of this is an 850 deg F (454 deg C) oven measure 20 in W x 20 in D x 20 in H. There are 100,000 Btu/hr installed in a modulating gas burner, while a 600 cfm, ½ hp recirculating blower provides horizontal airflow to the workload. This oven has 6 in insulated walls, an aluminized steel exterior and Type 430 stainless steel interior. The oven features a 12 in wide x 8 in high door installed in main door. Additional safety features include those required by IRI, FM and National Fire Protection Association Standard 86 for gas heated equipment, including a 325 cfm, ½ hp powered forced exhauster. The controls on the No. 843 include a digital indicating temperature controller.

The Grieve Corporation, 500 Hart Road, Round Lake, IL 60073-2835, 847-546-8225. Fax: 847-546-9210, sales@grievecorp.com, www.grievecorp.com.