Supplier Directory Subscribe
Advertisement
Advertisement
Advertisement
Home / Robotic Tool Change System

Robotic Tool Change System

Ideal for medium payload range automotive applications, the compact MPS 130 fully automatic tool change system from Stäubli is only 1.8 kg on the robot side and 1.1 kg on the tool side, with a maximum load of 100 kg and a bending moment of 900 Nm.

Posted: January 3, 2017

The compact MPS 130 fully automatic tool change system from Stäubli is ideal for medium payload applications in the automotive industry and more. The weight of the tool changer – only 1.8 kg on the robot side and just 1.1 kg on the tool side – is optimized so users do not have to invest in robots of the next highest payload category. It has a maximum load of 100 kg and a bending moment of 900 Nm.
Advertisement
Advertisement

Stäubli Corporation (Duncan, SC) introduces their new compact MPS 130 fully automatic tool change system for medium payload range. The MPS 130 is ideal for applications in the automotive industry, but the advantages of this automatic gripper and tool changer should open up other robot applications as well. Particular attention has been paid to the weight-optimized tool changer so that users do not have to invest in robots of the next highest payload category. The weight of the MPS 130 is only 1.8 kg on the robot side and just 1.1 kg on the tool side. It has a maximum load of 100 kg and a bending moment of 900 Nm. As with larger models, this new addition meets the strictest safety requirements according to safety category 3, performance level d.

The tool changer can be equipped with customized modules and components for media, data and electrical power transmission. To guarantee maximum reliability, Stäubli is the only manufacturer worldwide to develop and produce the complete changer single-handedly. The locking mechanism, the media module and the entire connection technology comes from a single source. The advantage is that all components are produced under an integrated quality management system in the highest production quality.

Stäubli Corporation, 201 Parkway West, Duncan, SC 29334, 864 486-5430, j.abel@staubli.com, www.staubli.us.

Calendar & Events
HOUSTEX
February 21 - 23, 2023
Houston, Texas
Texas Design-2-Part Show
March 1 - 2, 2023
Arlington, TX
Southeast Design-2-Part Show
March 29 - 30, 2023
Atlanta, GA
Greater New York Design-2-Part Show
April 26 - 27, 2023
Secaucus, NJ
Florida Design-2-Part Show
May 2 - 4, 2023
Orlando, FL
FABTECH
September 11 - 14, 2023
Chicago, IL
Advertisement
Advertisement
Advertisement
Advertisement