Advertisement
Advertisement
Home / Lower-Priced Cold Saw Delivers Higher-Quality Performance

Lower-Priced Cold Saw Delivers Higher-Quality Performance

The gravity-feed autocut H310 U bandsaw from Kalamazoo Machine Tool can miter 60 deg to the right and insure that each cut is fed exactly at the same rate, eliminating the need to open and close the valve on each cut.

Booth A-3568: For a lower-priced cold saw that still delivers the same quality performance, Kalamazoo Machine Tool eliminated the miter-left cutting feature on their gravity-feed autocut H310 U bandsaw, which is still capable of mitering 60 deg to the right using a TEFC 3-phase drive motor with two speeds: 140 fpm and 280 fpm. Its Autocut feature insures that each cut is fed exactly at the same rate, eliminating the need to open and close the valve on each cut.
Advertisement
Advertisement

In Booth A-3568, Kalamazoo Machine Tool (Portage, MI) eliminated the miter-left cutting feature on their gravity-feed autocut H310 U bandsaw in response to customer requests for a lower-priced cold saw that still delivers the same quality performance. This bandsaw is still capable of mitering 60 deg to the right and has a TEFC 3-phase drive motor with two speeds: 140 fpm and 280 fpm. Its Autocut feature insures that each cut is fed exactly at the same rate, eliminating the need to open and close the valve on each cut. The cycle start button is located in the trigger switch for safety. The blade will turn off at the end of the cut and the solenoid will hold the sawframe where lifted. Additional features of the H 310 U include an easily opened/closed vise with a handwheel, a quick handle for repetitive cuts, carbide guides with rollers, a totally enclosed worm gear transmission, full coolant system and full blade guarding. Several optional conveyor systems are available.

Kalamazoo Machine Tool, 6700 Quality Way, Portage, MI 49002-9756, 269-321-8860, wesaw@kmtsaw.com, www.kmtsaw.com.

0 Comments

Leave a Comment:

Calendar & Events
Southern New England Design-2-Part Show
December 3 - 4, 2020
Mohegan Sun Exposition Center, Uncasville, CT
AmCon Seattle (Tacoma)
February 9 - 10, 2021
Tacoma Convention Center – Seattle (Tacoma), WA
AmCon Wichita
March 3 - 4, 2021
Century II Performing Arts & Convention Center – Wichita, KS
AmCon Houston
March 31 - April 1, 2021
NRG Center – Houston, TX
AmCon Orlando
April 27 - 28, 2021
Orange County Convention Center – Orlando, FL
Greater Chicago Design-2-Part Show
May 5 - 6, 2021
Schaumburg Convention Center – Schaumburg, IL
Advertisement
Advertisement
Advertisement