Supplier Directory Subscribe
Advertisement
Advertisement
Advertisement
Advertisement
Home / Engine-Driven Welder Enables Simultaneous Welds

Engine-Driven Welder Enables Simultaneous Welds

Lincoln Electric’s Dual Maverick 200/200X is two welders powered by one diesel engine with two outputs, allowing two or more welders to work at the same time. Output remains steady even during arc stops and starts in dual mode.

Posted: March 4, 2020

Lincoln Electric’s Dual Maverick 200/200X is two welders powered by one diesel engine with two outputs, allowing two or more welders to work at the same time. Output remains steady even during arc stops and starts in dual mode.
Advertisement

The Dual Maverick 200/200X from Lincoln Electric (Cleveland, OH) is two welders powered by one diesel engine with dual welding outputs, allowing two or more welders to work at the same time in structural, pipeline, and maintenance and repair applications.

With optimized operations for the most efficient weld, the combination welder/generator’s minimized engine noise makes for a quieter experience. Engine RPM that varies based on output level and auto stop/start functionality saves fuel, and output remains steady even during arc stops and starts in dual mode.

An intuitive interface provides easy setup, a low learning curve, and more functionality, while maintenance reminders help keep the unit running in peak performance. These advancements are accessed via two 4.3-in, IP67-rated, color LCD screens, making them weatherproof and functional.

CrossLinc technology offers full control of output at the arc without cumbersome control cables, increasing productivity by reducing trips to the power source and promoting safety by reducing jobsite clutter. The convenient and easy-to-use technology also promotes weld quality consistency.

The The Dual Maverick 200/200X connects with Lincoln Electric’s Magnum PRO 250LX GT spool gun.

Lincoln Electric, 22801 St. Clair Ave., Cleveland, OH 44117, 888-935-3877, www.lincolnelectric.com.

Calendar & Events
Greater Detroit Design-2-Part Show
June 14 - 15, 2023
Novi, MI
FABTECH
September 11 - 14, 2023
Chicago, IL
So. California Design-2-Part Show
September 13 - 14, 2023
Ontario, CA
New England Design-2-Part Show
September 27 - 28, 2023
Marlborough, MA
Wisconsin Manufacturing & Technology Show (WIMTS)
October 3 - 5, 2023
West Allis, WI
Motion + Power Technology Event (formerly Gear Expo)
October 17 - 19, 2023
Detroit, MI
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement