Subscribe Supplier Directory
Advertisement
Advertisement
Advertisement
Advertisement
Home / Double Turbo Square Shoulder Mills and Inserts

Double Turbo Square Shoulder Mills and Inserts

Improve roughing operations and achieve superior surface finishes without high machine power consumption with Seco Tools’ Double Turbo line of cutters. Double-sided inserts and superior milling grades significantly lower finishing cycle times.

Seco Tools’ Double Turbo square shoulder cutters use resources with greater efficiency, resulting in a reduction of greenhouse gas emissions. Available in 19 metric variants ranging from 40 mm to 125 mm in diameter and 16-inch variants ranging from 1.5 inches to 5 inches.
Advertisement
Advertisement

The Double Turbo line of square shoulder mills and inserts from Seco Tools LLC (Troy, MI) improve roughing operations and reduce power consumption in steel, stainless steels, cast iron, and high-temperature alloys with an advanced cutter geometry. For the highest level of productivity, the tools use double-sided inserts with four cutting edges and state-of-the-art milling grades.

A highly accurate geometry with the most positive helix angle possible reduces the likelihood of surface mismatches and enables 90-degree angle accuracy. With such precision, finishing cycle times are significantly shortened and, in some cases, eliminated.

The ZOMX16 inserts have high, positive geometries for effective chip evacuation and reduced cutting forces. These features minimize vibrations for extended tool life and smooth surface finishes. The double-sided design provides significant cost-per-edge savings. Two geometries (ME10 and M12) and two radii (0.8 and 1.6). Both PVD and Duratomic CVD grades are available.

www.secotools.com

0 Comments

Leave a Comment:

Calendar & Events
The Assembly Show
October 27 - 29, 2020
Virtual
AmCon Cincinnati
November 4 - 5, 2020
Duke Energy Convention Center – Cincinnati, OH
AmCon Detroit (Novi)
November 17 - 18, 2020
Suburban Collection Showplace – Detroit (Novi), MI
Southern New England Design-2-Part Show
December 3 - 4, 2020
Mohegan Sun Exposition Center, Uncasville, CT
AmCon Seattle (Tacoma)
February 9 - 10, 2021
Tacoma Convention Center – Seattle (Tacoma), WA
AmCon Wichita
March 3 - 4, 2021
Century II Performing Arts & Convention Center – Wichita, KS
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement