Supplier Directory Subscribe
Home / Dual-Spindle Milling Machine

Dual-Spindle Milling Machine

Like the company’s other combination mills, Kent Industrial’s KTM-VH500EVS enhances efficiency by enabling operators to perform horizontal and vertical milling with the same machine. Operators can make heavier, deeper cuts without extra setup time.

Posted: December 31, 2020

Designed to reduce setup times, Kent Industrial’s KTM-VH500EVS dual-spindle horizontal/vertical milling machine measures 81.5 inches by 75 inches by 102 inches.

The KTM-VH500EVS dual-spindle horizontal/vertical milling machine from Kent Industrial USA Inc. (Tustin, CA) features:

  • Turret-type inverter / variable-speed head
  • 7.5-horsepower horizontal spindle motor and 5-horsepower vertical spindle motor and with nine speed ranges
  • 50-by-14.6-inch hardened and ground table top
  • Saddle and knee with hardened and ground square (box) ways
  • Precision ball screws in X and Y axes
  • X and Y axes driven by AC servo motor
  • Precision bored and ground milling head with super precision ABEC-7 bearings
  • Meehanite casting with coolant reservoir in machine base
  • Coolant system and chip tray
  • Centralized automatic lubrication with metered check valves.

Standard accessories include coolant system; X, Y axes servo motor; X, Y axes ball screw; vertical head auto lubrication pump; and slideway auto lubrication pump. Optional accessories: 44.1-inch X-axis travel and Z-axis servo motor.

Calendar & Events
February 21 - 23, 2023
Houston, Texas
Texas Design-2-Part Show
March 1 - 2, 2023
Arlington, TX
Southeast Design-2-Part Show
March 29 - 30, 2023
Atlanta, GA
Greater New York Design-2-Part Show
April 26 - 27, 2023
Secaucus, NJ
Florida Design-2-Part Show
May 2 - 4, 2023
Orlando, FL
September 11 - 14, 2023
Chicago, IL