Supplier Directory Subscribe
Advertisement
Advertisement
Advertisement
Advertisement
Home / Multiconfiguration Welding Workholder

Multiconfiguration Welding Workholder

Strong Hand Tools’ universal vises quickly and securely clamp stock of different thicknesses at multiple angles into place. They can be removed from the base and used separately.

Strong Hand Tools’ universal vises quickly and securely clamp stock of different thicknesses at multiple angles into place. They can be removed from the base and used separately.
Advertisement
Advertisement

Made of malleable cast iron, the WAS100 single vise and WAV200 duo universal welding vises from Strong Hand Tools (Santa Fe Springs, CA) quickly and securely clamp stock of different thicknesses at multiple angles into place. Press the quick-acting button to allow the copper-plated threaded screws to slide in and out for fast setup. Release the button to re-engage the screw for tightening.

Clamp at any angle by turning the individual clamps on the fixture base for a wide range of angle settings. Clamp round and square tubing, angled and flat stock at 5 to 180 degrees. They can be removed from the base and used separately.

Jaw opening: 4 inches; jaw height: 1-3/8 inches.

The WAS100 single vise weighs 8.5 pounds (4 kg); the WAV200 duo weighs 25.3 pounds (11.5 kg).

www.stronghandtools.com

0 Comments

Leave a Comment:

Calendar & Events
Greater Chicago Design-2-Part Show
August 3 - 4, 2021
Schaumburg Convention Center – Schaumburg, IL
MD&M West
August 10 - 11, 2021
Anaheim, CA
rapid + tct
September 13 - 15, 2021
Chicago, IL
FABTECH
September 13 - 16, 2021
Chicago, IL
Wisconsin Manufacturing & Technology Show
October 5 - 7, 2021
West Allis, WI
EASTEC
October 19 - 21, 2021
West Springfield, Massachusetts
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement