Supplier Directory Subscribe
Advertisement
Advertisement
Advertisement
Advertisement
Home / Metrology Sensors For Production Site Visualization and Productivity

Metrology Sensors For Production Site Visualization and Productivity

Mitutoyo America’s EJ Counters and  LG100 Series Linear Gages are compact, high-speed, and easy to use. Even data management is simplified with a USB interface provided for easy connection with a computer.

Up to eight compact EJ Counters can be linked providing the capacity to connect to 16 gages.
Advertisement
Advertisement

New EJ Counters and LG100 Series Linear Gages, the latest additions to Mitutoyo America Corp.’s (Aurora, IL) expansive sensor lineup of metrology products, combine compact size with ease of use.

EJ Counters and LG100 Series Linear Gages features include:

Environmental Resistance – Sliding durability of more than 50 million cycles*, with a protection level of IP67G. A highly oil-resistant material is used in the rubber cap and cable sheath, so it can be used even in harsh environments (*10 mm range models)

Reference Point Detection – Reference point signal output functions are featured throughout this series. When incorporating into a device, the master setting value is easy to set and is retained after shutdown.

Compact Size and Ease of Use – High-speed and compact, it delivers production site visualization, improved productivity, and information feedback. Up to eight compact EJ Counters can be linked providing the capacity to connect to 16 gages. On a DIN rail, each unit can be connected directly without using cables to maximize space. All linked units and gages can be driven by a single power source.

CC-Link Connection, USB Connection – Data can be output through an industrial interface (CC-Link) by linking a compact EJ Counter with an interface unit. Constant data monitoring and positional management are performed. A USB interface is also provided for easy connection with a computer.

Calculation Function: Enables sum difference operations between two gages connected to the same counter. Additionally, functions such as tolerance judgment and peak hold are included.

www.mitutoyo.com

 

 

 

0 Comments

Leave a Comment:

Calendar & Events
Greater Chicago Design-2-Part Show
August 3 - 4, 2021
Schaumburg Convention Center – Schaumburg, IL
MD&M West
August 10 - 11, 2021
Anaheim, CA
rapid + tct
September 13 - 15, 2021
Chicago, IL
FABTECH
September 13 - 16, 2021
Chicago, IL
Wisconsin Manufacturing & Technology Show
October 5 - 7, 2021
West Allis, WI
EASTEC
October 19 - 21, 2021
West Springfield, Massachusetts
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement