Supplier Directory Subscribe
Advertisement
Advertisement
Advertisement
Advertisement
Home / Cut longer with Kennametal’s KCK20B™ and KCKP10™ indexable milling grades

Cut longer with Kennametal’s KCK20B™ and KCKP10™ indexable milling grades

New grades offer higher wear resistance and longer tool life, increasing productivity in cast iron and compacted graphite cast iron machining.

Posted: May 9, 2022

Kennametal has introduced the KCK20B and KCKP10 indexable milling grades for higher wear resistance and up to 30% longer tool life when machining cast iron and compacted graphite iron components. Both grades offer higher productivity and consistent, repeatable performance during roughing, semi-finishing, and finishing operations. Available for many indexable milling product lines, the new grades come with a golden top layer for fast, easy wear identification, ensuring maximum tool life for each cutting edge.
Flank wear comparison: KCK20B on the left and another grade on the right. Flank wear limits tool life when machining cast iron and compacted graphite cast iron. KCK20B and KCKP10 grades provide longer tool life, boosting productivity significantly.
Advertisement
Advertisement

Kennametal has introduced the KCK20B and KCKP10 indexable milling grades for higher wear resistance and up to 30% longer tool life when machining cast iron and compacted graphite iron components. Both grades offer higher productivity and consistent, repeatable performance during roughing, semi-finishing, and finishing operations. Available for many indexable milling product lines, the new grades come with a golden top layer for fast, easy wear identification, ensuring maximum tool life for each cutting edge. “The new grades feature High-Power Impulse Magnetron Sputtering (High-PIMS) technology that provides a smoother insert surface and optimal layer adhesion for less flank wear – one of the leading causes of insert failure,” says Gil Getz, Product Manager, Kennametal. He notes that the new coating technology also increases cutting edge strength. “The result is high-performance milling in a broad range of cast iron alloys, including grey cast iron, ductile cast iron, and compacted graphite cast iron.”

Kennametal, KCK20B, KCKP10, indexable milling, indexable milling grades, 30% longer tool life, High-Power Impulse Magnetron Sputtering, High-PIMS, Gil Getz
Flank wear comparison: KCK20B on the left and another grade on the right. Flank wear limits tool life when machining cast iron and compacted graphite cast iron. KCK20B and KCKP10 grades provide longer tool life, boosting productivity significantly.

Flank wear comparison: KCK20B on the left and another grade on the right. Flank wear limits tool life when machining cast iron and compacted graphite cast iron. KCK20B and KCKP10 grades provide longer tool life, boosting productivity significantly. KCK20B and KCKP10 are suitable for wet or dry cuts. These include rotor hubs used in windmills, pump housings, steering knuckles and gear housings for heavy equipment, and automotive components like crankshafts and cylinder heads. While KCK20B delivers higher productivity in roughing and semi-finishing operations, KCKP10 is applicable for finishing operations, but also works exceptionally well when profiling and copy milling cast iron and steels up to 45HRC. “For customers where high tooling cost and downtime associated with tool changes are especially important, KCK20B and KCKP10 grades promise to increase tool life tremendously,” says Getz. “And for those who wish to increase throughput, the new grades deliver there as well. Either way, it is a win-win for any shop machining cast iron.”

KCK20B™ & KCKP10™

www.kennametal.com

Calendar & Events
Design-2-Part Northern California
May 25 - 26, 2022
Santa Clara, California
Automate
June 6 - 9, 2022
Detroit, Michigan
FABTECH Canada
June 14 - 16, 2022
Toronto, Ontario
Design-2-Part Upper Midwest
June 21 - 22, 2022
Minneapolis, Minnesota
IMTS
September 12 - 17, 2022
Chicago, Illinois
FABTECH
November 8 - 10, 2022
Atlanta, Georgia
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement