Filter by Process Zone:
Magnetic V-Pad clamps from Industrial Magnetics, Inc. use dual pivoting magnetic heads to hold workpieces at up to 180 degrees. Use them for repetitive applications because set-up and positioning are quick and easy.
Haimer USA’s Tool Dynamic (TD) balancing machine extends cutting tool life, reduces machine spindle wear, improves surface finishes, and increases productivity by enabling a shop to achieve full machining capacity. Measurements to <1 gmm.
Tramming in a workpiece or fixture to a machine, measuring lengths and depths, checking flatness, or aligning workpieces and vise? Haimer USA’s 3-D sensors make locating the edge in XYZ as easy as 1-2-3.
The Power Clamp Preset NG from Haimer features a new generation coil that adapts to the size of the shrink-fit chuck. With 13 kW power, it’s made for solid-carbide and HSS tools from 3 mm to 32 mm in diameter.
Rohm’s Easylock system offers repeatability of less than 5 µm. Its draw bolt system creates a precision interface between the receiver unit and pallet carrier, which can be fitted with vises, stationary lathe chucks, collet chucks and customized fixturing solutions.
Six thousand-square-foot ‘real estate’ will be a dynamic, interactive attendee destination.
Schunk’s Kontec KSX-C power-assisted vise with continuously variable force adjustment ensures a secure hold event with minimal clamping surfaces. Fully encased spindle, drawbar extensions, and large jaw range enable the vise to adapt quickly and easily to any new requirement.
Along with extremely heat-resistant coatings and special carbide substrates, Mapal’s OptiMill-3D solid carbide milling cutters are characterized by the dimensions and geometries specifically adapted to mold making.
The GARANT Xtric centering vise from Hoffmann Group is equipped with a chuck jaw quick-change system that reduces set-up times when clamping blanks and finished parts.
Modular and versatile SLV and GSV rail stock configurations from BESSEY Tool provide the widest range of clamping applications that can be customized to specific needs by adding extra sliding arms or choosing different sliding arms.
Utilizing an integrated notching system for accurate angles, the Angle-Rite Clamping System from Meridian Stainless can join one to three intersecting tubes or pipes easily and manage any weld distortion.
Hilma self-locking wedge clamps from Carr Lane Roemheld are powered by spring force that is ideal for clamping dies with a straight clamping edge, for metal stamping die change or plastic mold change.
GWS Tool Group Announces Acquisition of STF Precision (STF)
The acquisition of STF Precision enhances the GWS product portfolio and capabilities in the area of PCD and CBN solutions and further expands the GWS manufacturing presence into the Carolinas.
Amid Challenges, Majority of Metalformers Predict Little Change in Economic Activity
U.S and Canadian incoming orders expected to remain steady, according to the latest barometer reading from the Precision Metalforming Association.