Filter by Process Zone:
b+s group combines cut-to-length and slitting lines at a speed of up to 100 m/min. The time-saving process also incorporates inspection measures that make this sheet metal processing suitable for sensitive surfaces like stainless steel and aluminum strips.
The steel service center launched production of a new heavy gage cut-to-length line with a stretcher leveler.
The fresh new layout provides user-friendly navigation through information about their equipment and services.
Their Laser Blanking Line 2.18 at Ansteel features two cutting heads for processing outer skin blanks from coil material at high speeds.
The Time Tracker System from Red Bud Industries is a production monitoring system with an organized, easy-to-use interface a supervisor needs to monitor multiple coil processing lines in a single factory or several locations.
The Anglemaster-663 from Peddinghaus uses three punch stations per hydraulic press to automate punching, nibbling, shearing and marking of angle and flat bar.
This High Speed Slitting Line from Red Bud Industries will increase their capacity to supply slit coils to the Midwest, East Coast and Southeast U.S.
This job is for a Tier 1 automotive supplier in North America and will be configured to pair with an existing FLEX In-Press Transfer system.
This high speed line from Red Bud Industries processes AHSS automotive steel and other surface critical material with ultra-high tensile strengths.
This new machinery from COE Press provides the flatness and tolerance required for producing near-net-shape blanked automotive parts.
This custom-built aluminum cut-to-length line from Burghardt+Schmidt guarantees leveling quality for evenness, narrow tolerances, high surface quality and fewer rejects so that Martinrea Honsel Germany can optimize their light metal plate and strip production.
Barry Melnkovic advances to senior vice president and chief human resources officer.
Hexagon and Authentise Partner On End-To-End AM Software Solution
The first-of-its-kind solution will integrate shop floor data with data intelligence to orchestrate consistent quality from concept to part. Statistical process control combined with machine learning and artificial intelligence methods will mitigate waste and quality issues during design while improving AM repeatability.
Report: Industry Accelerating Past Recovery, Toward Digital Future
Fictiv’s 2021 State of Manufacturing Report finds manufacturing leaders focused on resilience, sustainability, and speed through digital transformation. But concerns about supply chain and workforce grow.
Beckwood to Manufacture Two Custom Hydraulic Presses for WHK BioSystems
A 110-ton 4-post compression molding machine will be used for R&D, and a 1650-ton compression molding press will be used in the production of UHMW sheets – the demand for which is rising in medical, aerospace, and defense sectors.