End-of-Arm Tooling
Filter by Process Zone:
Axially-Compliant Orbital Sander for Robotic Surface Treatment
With weight offset by double-acting motion, AOV-10 produces desired finish regardless of orientation – even if it’s upside down. And because it’s automated, employees are protected from the dangers associated with manual operations.
Schunk Introduces EGH 80 at ATX West Automation Show
The company adds to its award-winning Co-act (collaborative actuator) gripper line with the EGH, which provides a stroke length of 3.15 in (80 mm) and 100 newtons of clamping force. The EGH 80 is designed for Universal Robots products, but Schunk will expand to include other robot manufacturers.
Adjustable-Center 5-Axis Vise
Schunk’s Kontec KSX-C power-assisted vise with continuously variable force adjustment ensures a secure hold event with minimal clamping surfaces. Fully encased spindle, drawbar extensions, and large jaw range enable the vise to adapt quickly and easily to any new requirement.
Record Sales of Collaborative Robots Reveal Increasing Demand for End-Of-Arm-Tooling
Annual installations of collaborative robots (cobots) grew 23% from 2017 to 2018, according to the World Robotics Report, published by International Federation of Robotics.
Highly Customizable Electric Vacuum Gripper Ideal for Small Spaces
Based on the design of OnRobot’s award-winning VG10 electric vacuum gripper, the smaller and lighter VGC10 offers the same 35-pound payload for smaller robot arms. Powerful and flexible enough for nearly any application.
One-System Robot-Compatibility Solution
Unified mechanical and electric interface for any OnRobot
end-of-arm tooling (EoAT) dramatically simplifies automation.
OnRobot Grippers Receive UR + Certification for Seamless Operation
The certified URCap software provides a unified interface for OnRobot’s new versions of RG2, RG6, and VG10 grippers with Universal Robots (UR).
How to Improve Pick-and-Place Small Part Handling
The lightweight EGB four-stage mechatronic gripper from SCHUNK swiftly and accurately picks and places even deformation-sensitive parts.
Magnetic Sheet Fanners, End-Of-Arm-Tooling for More Efficient, Safer Press Room Operations
Magnetic sheet separation fanners and magnetic end-of-arm-tooling from Industrial Magnetics are ideal for handling sheet metal, metal blanks, stampings and parts in office furniture, appliance, stamping, fabrication and other applications.
Robotic Grippers for Efficient Tending of Metal Fabrication Operations
The RG2 Collaborative Gripper and the VG10 dual-zone electrical vacuum gripper from OnRobot provide dual grip capabilities, flexibility and more to optimize handling and cut machine tending time.
OnRobot Opens First R&D Office in U.S.
The new location in Los Angeles provides opportunities to attract talent and expand their robotic gripper portfolio.
Metal Handling is Only as Good as its EOAT
End-of Arm Tooling systems from Piab optimize the precision handling of difficult loads, from repeatable blank transfers and placements in press stamping to vertical and horizontal pick-and-placing of spools, machined parts, pipe, large gears, barrels and more.
Industry News
