Videos
Watch Manufacturing Products in Action
Know exactly how a product would work in your facility by checking out one of our videos showing how they operate.
Our Collection of Product Videos
At Fabricating & Metalworking, we know the importance of showing and not telling – and that’s why we have a vast library of videos showing how important pieces of equipment operate. See the latest videos added to our site, or browse our archives by process zone.
Questions about our videos? Get in touch with Fabricating & Metalworking today!
Filter by Process Zone:
Rethinking Bending Automation
Don’t attempt to adapt an assembly robot into a bending cell. New application-driven robots work alongside press brakes to simplify part programming and minimize cycle times. Instead, add process reliability enhancements and offline software and your return on investment for bending automation becomes clear and highly achievable. Here’s how to do it.
Robotic Welding Automation for the Small Job Shop
The conclusion of our three-part series on automation for the small shop examines the primary components involved in the justification and payback of your capital expenditure so that you can optimize your financial return on investment.
Hurco Premieres New Web Series about Machinists
Hurco debuted a new web series at the Canadian Manufacturing & Technology Show (CMTS) during Student Day.
WESTEC 2013
Here is a snapshot of some of the machine tools, CAD/CAM software, tooling and workholding, inspection systems and other equipment that was exhibited October 15-17 on the show floor at the Los Angeles Convention Center – a must see of innovative metalworking technology.
Deburr Both Sides of Drilled, Punched or Reamed Holes in One Operation
The high quality M-2, high speed cutting steel Burr-Zit clothespin type deburring tool from Whitney Tool can de-burr up to five thousand holes per grind with approximately 6 to 20 grinds per tool, depending on size for unmatched performance and economy.
Intuitive, Integrated and Mobile NC Simulation Software
NCSIMUL Machine 9 NC simulation software from SPRING Technologies is more realistic, intuitive, integrated, and mobile with extended features dedicated to multi-axis and multitasking machining centers that interconnect with other company-wide software systems, such as MRP, ERP, and MES.
Fully Integrate Surface Finish Inspection within Coordinate Measurement Routines
The SFP1 probe option for the REVO® five-axis measurement system from Renishaw is the first to allow surface finish inspection to be fully integrated within coordinate measurement routines.
Advanced Waterjet Cutting of Complex Parts from Any Material
The robust and highly versatile MAXIEM 1530 JetCutting® Center and A-Jet® cutting head from OMAX Well suited for smaller fabrication shops and metal service centers.
Next Generation High Speed Machining Center
The M8Cube high-speed machining center is Datron Dynamics’ newest model with all of the latest advancements in high-speed machining technology, including brushless, direct drives that provide fast acceleration, feed rates up to 866 ipm and short cycle times.
As The World Turns
A process-controlled hard turning cell in this Texas machine shop deploys programmable gages for measuring and sorting mud-motor bearings – and the cell pays for itself in 18 days.
An Application Guide for Scissor Lifts
To select an appropriate scissor lift for a specific application, here is the basic information that must be considered, including capacity, the nature of the load, the means of loading and unloading, the travel and lowered height, the platform size, speed requirements, power and duty cycle requirements, and more.
SOUTH-TEC 2013
Take a tour through some of the machine tools, CAD/CAM software, tooling and workholding, inspection systems and other equipment exhibited on the show floor at the TD Convention Center in Greenville, SC, on October 29-31.