Boiler Tube Membrane and Overlay Removal

The Membrane and Overlay Removal Head from ESCO Tool uses proprietary long-life inserts shaped like golf tees, rather than screws, to remove boiler tube membrane and overlay plus bevel all at the same time, with minimum vibration and reduced heat.

This Membrane and Overlay Removal Head uses proprietary long-life inserts shaped like golf tees, rather than screws, to remove boiler tube membrane and overlay plus bevel all at the same time, with minimum vibration and reduced heat.

In Booth C-5735 a new patented membrane and overlay removal head that features a long-life cutting edge design and fits several of their MILLHOG® beveling end prep tools will be introduced by ESCO Tool Company (Holliston, MA). The Membrane and Overlay Removal Head features proprietary inserts shaped like golf tees, rather than screws, that can be easily rotated to utilize their 360 deg cutting edge. Capable of removing boiler tube membrane and overlay plus beveling simultaneously, the head is available to fit MILLHOG® end prep tools covering a tube range from 7/8 in to 3 in OD.

As the Membrane and Overlay Removal Head rotates, the holding forces of the inserts are multiplied which minimizes vibration, reduced heat, and promotes long-life. Simple to use, the golf tee-shaped inserts tap into place and are removed the same way. The head also holds a beveling blade. The Membrane and Overlay Removal Head is priced from $325.00, depending upon which MILLHOG® tool it fits. It can be purchased with a new tool or retrofit. www.escotool.com

0 Comments



Current ye@r *

Events Calendar
September 15 - 17, 2014
San Diego Convention Center -- San Deigo, CA
September 15 - 17, 2014
Guangzhou International Mould & Die Exhibition, China Import and Export Fair Complex -- Guangzhou, China
September 16 - 18, 2014
Houston, TX
September 17, 2014, 10:30am - 11:30am
Webinar Hosted by Burr Oak Tool, Sturgis, MI
September 17 - 18, 2014
John S. Knight Center -- Akron, OH