SHEARING OF COIL LINE MADE EASIER WITH POWERFUL SLITTING SHEAR
Trumpf will exhibit their TruTool C 250 slitting shear with chip clipper and Li-Ion battery, designed to facilitate shearing of coil line. As a result of a 500-watt motor and blade geometry design, the slitting shear is very fast and powerful and has a working speed of 13 feet per minute.
Posted: November 20, 2008
Trumpf will exhibit their TruTool C 250 slitting shear with chip clipper and Li-Ion battery, designed to facilitate shearing of coil line. As a result of a 500-watt motor and blade geometry design, the slitting shear is very fast and powerful and has a working speed of 13 feet per minute. Able to make both straight and curved cuts, the C 250 is flexible enough to handle a wide range of applications, including the cutting of spiral seam ducts, C-U-L profiles and wire ducts.
The portable power tool can cut mild steel up to 0.098 inches, high tensile steel to 0.059 inches and aluminum to 0.118 inches. And at only 4.4 pounds, the tool is very lightweight. Additional features include fast tool change and a long cutting tool life. Using a simple quick release pin, the center cutters can be replaced in less than 15 seconds without additional tools or accessories. In addition, outer cutters are reversible, which doubles the tool life of one set of cutters. Burr-free and distortion-free cutting make the slitting shear good for applications in sheet metal processing for the performance racing industry, coil-applications and others.
www.us.trumpf.com
Subscribe to learn the latest in manufacturing.
Industry News
