3-IN-1 CUT/GRIND/FINISH WHEELS PROVIDE HIGH PERFORMANCE AND EFFICIENCY IN A SINGLE DISC
CGW-Camel Grinding Wheels‘ 3-in-1 combo wheels, manufactured with three complete layers of fiberglass and a high-quality white aluminum oxide grain, easily grind stainless steel and steel.
Posted: November 29, 2010
CGW-Camel Grinding Wheels (Niles, IL) expanded its high performance line of abrasive wheels with the introduction of its 3-in-1 cut/grind/finish combo wheels.
Engineered utilizing innovative manufacturing technology, the 3-in-1 combo wheels allow for cutting, grinding and finishing with one wheel, which eliminates frequent wheel changes and increases production times. By angling a right-angle grinder at a 90-degree position, the new combo wheel cuts; when positioned at a 30-deg angle, the wheel grinds; and when used at a 15-deg angle, the wheel finishes.
Manufactured with three complete layers of fiberglass and a high-quality white aluminum oxide grain, the new .094 thickness 3-in-1 combo wheels easily grind stainless steel and steel. A fiberglass net reinforcement adds strength and flexibility to the wheels which promotes safer cutting, grinding and finishing. The wheels are contaminate-free, containing less than 0.1 percent of iron, sulfur, or chlorine, for rust-free and corrosion-free results.
“The new high-performance 3-in-1 wheels provide fast, high-quality cutting, easy grinding and excellent surface finishing. Using one wheel for three applications gives the end user a time and cost savings,” said Joe O’Mera, president, CGW-Camel Grinding Wheels.
Subscribe to learn the latest in manufacturing.
Industry News
