Magic Coil Installs Multi-Blanking Line
The new line from Red Bud Industries can process coils up to 50,000 lb, 72 in wide and .140 in thick.
Posted: September 24, 2015
Red Bud Industries (Red Bud, IL) recently installed a Precision Multi-Blanking Line at Magic Coil Products LLC, (Butler, IN) that features a Precision Grip Feed System and CNC Programmable Slitter combination of machines that gives Magic Coil the capability of producing blanks with width and length tolerances of ±.005 in. The CNC Slitter can be set up in less than two minutes per cut, thus eliminating costly down time that can occur when using conventional Packed Arbor Slitters.
An additional advantage to the system will be the Automatic Strip Divider Positioning. While the operator is setting up the Slitting Head, the Strip Divider Positioning System will automatically set up the dividers in the Strip Stacker. When the operator has finished setting up the Slitting Head, the Strip Stacker will be ready to run blanks.
This new line is capable of processing coils up to 50,000 lb at widths up to 72 in and thicknesses up to .140 in. The new line consists of a Coil Lift, Uncoiler, Peeler Breaker, Crop Shear, 5 Hi Precision Leveler, “Pop Up” Flatness Inspection Table, “Hands Free” Thread System, Dual Motor Grip Feed, CNC Programmable Slitter, Scrap Winders, Shear, Combination Drop/Strip Stacker, Part Diverter, Automatically Lowering Stack Table, and End Discharge Rollouts.
Subscribe to learn the latest in manufacturing.
Industry News
