Home / Water-Soluble, Semi-Synthetic Fluid for Broaching and Reaming

Water-Soluble, Semi-Synthetic Fluid for Broaching and Reaming

AquaTec OH 3557 from Oelheld is ideal for machining tough materials, such as cobalt, chromium alloys, titanium alloys, and stainless steel. Their DiaMill HEF 1100 high performance cutting oil is based on hydrocrack oils.

Posted: May 12, 2016

DiaMill HEF 1100 high performance cutting oil from Oelheld is the ideal alternative to water soluble cooling lubricants for turning, milling, drilling, hobbing, and cutting operations on high alloyed steel, cast iron or non-ferrous metals, and provides long life without adding regenerative additives.

AquaTec OH 3557 is a water-soluble semi-synthetic metalworking fluid from Oelheld is designed to give shops excellent machining, reduced foaming, and full corrosion protection when machining tough materials such as cobalt chromium alloys, titanium alloys, and stainless steel.

Oelheld U.S. Inc. (Elgin, IL) offers AquaTec OH 3557, a water-soluble semi-synthetic metalworking fluid designed to give shops excellent machining, reduced foaming, and full corrosion protection in a wide range of manufacturing applications. Due to its exceptional lubricity, this water miscible coolant can be used in light, medium, and severe applications, including broaching and reaming. Its highly stable formulation makes this metalworking fluid a great choice for operations and maintenance managers worldwide. It is designed for machining tough materials such as cobalt chromium alloys, titanium alloys, and stainless steel.

Oelheld also offers DiaMill HEF 1100 high performance cutting oil that is based on hydrocrack oils. Used by industry giants in automotive and gear manufacturing, it has nearly no odor, has high shearing stability, is extremely resistant to aging, and is physiologically safe (no aromatic content). DiaMill HEF 1100 does not contain chlorine or any heavy metals. Its good viscosity/ temperature relationship guarantees maximum flushing and cooling properties over a wide temperature range. High performance additives with guaranteed maximum pressure absorption, in combination with interfacial active substances, allow for high cutting speeds and excellent surface finish. Tool life is considerably increased while the formation of a built-up cutting edge is effectively prevented.

The extremely low tendency towards vaporization and misting with DiaMill HEF 1100 results in a high level of safety during use – and also in high profitability. This cutting oil is not aggressive towards varnishes and elastomers. It has a high flash point, greater than 302 deg F (150 deg C), even with its low viscosity. Endorsed by major machine manufacturers, this cutting oil is the ideal alternative to water soluble cooling lubricants for turning, milling, drilling, hobbing, and cutting operations in modern CNC-controlled machining centers. It is especially designed for use with high alloyed steel, cast iron, or non-ferrous metals, and provides long life without adding regenerative additives. DiaMill HEF 1100 cutting oil is cost effective for shops by being gentle to machines and equipment, and absolutely safe for the work force

Oelheld U.S. Inc., 1760 Britannia Drive, Unit 1, Elgin, IL 60124, 847-531-8501, Fax: 847-531-8511, www.oelheld.com.