Advertisement
Advertisement
Home / Sustainable Cleaning of Highly-Advanced Processes

Sustainable Cleaning of Highly-Advanced Processes

Tergo Metal Cleaning Fluid from MicroCare achieves the very best metal cleaning results while also addressing specific regulatory requirements, environmental concerns and cost reduction targets.

Booth A-4045: As one of the toughest vapor degreasing fluids on the market, Tergo Metal Cleaning Fluid from MicroCare Tergo MCF is an effective metal degreaser and parts debinder that works effectively on highly-advanced processes, such as metal injection molding and additive manufacturing, and has been formulated to replace traditional solvents like nPB, TCE, methylene chloride, and PERC.
Advertisement
Advertisement

Sustainability should be a key driver when it comes to choosing cleaning solutions. It is important to understand the value of a simple, consistent and sustainable process. It must be flexible in that it can adapt to any future changes, whether it be regulatory, environmental or with specific cleaning requirements. With this in mind in Booth A-4045, MicroCare Corporation (New Britain, CT) will present their portfolio of sustainable cleaning and finishing solutions, with their most recent addition – Tergo™ Metal Cleaning Fluid (MCF) – taking center stage. “The landscape for cleaning processes is continually changing,” said Rob Lee, the senior market and technical manager at MicroCare. “Whether that is through specific regulatory requirements or environmental concerns, cleaning results or cost reductions, trying to find a solution that is sustainable can be difficult for those in the metal manufacturing industry.” Tergo MCF addresses all of these concerns while achieving the very best cleaning results.

As one of the toughest vapor degreasing fluids on the market, Tergo MCF is an effective metal degreaser and parts debinder that works effectively on highly-advanced processes, such as metal injection molding and additive manufacturing. This cleaning fluid helps in the critical step of selectively removing the correct amount of the binder so as not to cause any damage, but enough for the final sintering process. Importantly, it has been formulated to replace traditional solvents like nPB, TCE, methylene chloride, and PERC. Additionally, the range of Tergo products have a low Global Warming Potential and are REACH/ROHS-compliant. Compatible with existing vapor degreasing equipment, Tergo MCF is compliant with all current and proposed environmental, health and safety regulations, giving it long-term sustainability credentials.

MicroCare Corporation, 595 John Downey Drive, New Britain, CT 06051, 860-827-0626, support@microcare.com, www.microcare.com.

0 Comments

Leave a Comment:

Calendar & Events
Southern New England Design-2-Part Show
December 3 - 4, 2020
Mohegan Sun Exposition Center, Uncasville, CT
AmCon Seattle (Tacoma)
February 9 - 10, 2021
Tacoma Convention Center – Seattle (Tacoma), WA
AmCon Wichita
March 3 - 4, 2021
Century II Performing Arts & Convention Center – Wichita, KS
AmCon Houston
March 31 - April 1, 2021
NRG Center – Houston, TX
AmCon Orlando
April 27 - 28, 2021
Orange County Convention Center – Orlando, FL
Greater Chicago Design-2-Part Show
May 5 - 6, 2021
Schaumburg Convention Center – Schaumburg, IL
Advertisement
Advertisement
Advertisement