Supplier Directory Subscribe
Advertisement
Advertisement
Advertisement
Home / AIDA-America to Demonstrate Industry Leading Stamping Press Technology at FABTECH® Mexico 2023

AIDA-America to Demonstrate Industry Leading Stamping Press Technology at FABTECH® Mexico 2023

Among the highlights at the booth will be AIDA’s DSF-C1-A Series Gap Frame Servo Press with its exclusive Allen-Bradley Control.

Posted: February 23, 2023

AIDA’s exclusive Allen-Bradley based servo press control for 315-to-3,500-ton presses will demonstrate several servo press motion profiles in real-time on a virtual press at FABTECH® Mexico 2023, Booth 3909.
AIDA’s gap frame servo press with AIDA’s exclusive Allen-Bradley control will demonstrate AIDA’s optimized servo silent blanking motion profile at FABTECH® Mexico 2023, Booth 3909.
AIDA single point, mechanical gap frame press will demonstrate AIDA’s high quality, industry leading gap frame press advantages at FABTECH® Mexico 2023, Booth 3909.
Advertisement
Advertisement
AIDA-America, press technology, servo presses, FABTECH Mexico 2023, mechanical gap frame press, direct-gap frame servo press
AIDA’s gap frame servo press with AIDA’s exclusive Allen-Bradley control will demonstrate AIDA’s optimized servo silent blanking motion profile at FABTECH® Mexico 2023, Booth 3909.

AIDA-America, metal stamping press manufacturer in Dayton, OH, USA, will demonstrate industry leading press technology in booth 3909 at FABTECH® Mexico 2023.

Two AIDA presses, along with AIDA’s exclusive Allen-Bradley based control for larger servo presses, will be demonstrated at this year’s FABTECH® Mexico event, taking place from May 16-18 at Centro Citibanamex in Mexico City.

The first, an AIDA single point, mechanical gap frame press is part of AIDA’s high quality, industry leading gap frame press line, with models ranging from 35-to-250 tons. The fastest acting hydraulic overload protection (HOLP) in the industry at 10 ms, a highly rigid frame with low angular deflection, and the tightest clearances available in a gap frame press, which minimize reverse tonnage, are just a few standard features of these NC1 Series presses.

AIDA-America, press technology, servo presses, FABTECH Mexico 2023, mechanical gap frame press, direct-gap frame servo press
AIDA single point, mechanical gap frame press will demonstrate AIDA’s high quality, industry leading gap frame press advantages at FABTECH® Mexico 2023, Booth 3909.

The second is AIDA’s A Series single point, direct-drive gap frame servo press, showcasing AIDA’s exclusive Allen-Bradley control. Standard DSF-C1-A Allen-Bradley control features include a swing-arm mounted 12 in. color touch screen HMI, an Allen-Bradley servo motion controller on ControlLogix® platform, 150 job recipe storage, an integrated tonnage monitor (peak only), a step-feed (CNC handwheel) slide motion control for ease of die set-up, 8 PLS cams, 8 channel die protection with PNP/NPN signals, display of actual and virtual crank angles, and ergonomically designed optical run buttons to provide the highest level of safety while helping to reduce operator fatigue. Additional AIDA DSF-C1-A series highlights are a next generation servo motor with 5-to-10% higher speeds than AIDA’s previous generation gap frame servo presses, a capacitor-based Energy Conservation and Optimization (ECO) system that reduces peak energy draw, and a state-of-the-art Electronic Over Load Protection (EOLP) system that monitors applied torque through the complete stroke to prevent overloading. This press will be blanking parts with AIDA’s optimized servo silent blanking stroke motion profile, which can only be achieved on a servo press. AIDA’s new DSF-C1-A Series product line is offered in a range of tonnages from 80-to-250 tons.

Additionally, AIDA will be exhibiting its exclusive Allen-Bradley based servo press control, the latest in servo press control technology, for servo presses from 315-to-3,500 tons. This fully operational and interactive 19 in. PC touch screen Allen-Bradley control will demonstrate several servo press stroke motion profiles in real-time on a virtual press. Control features include direct access to a pdf of the press manual and display of actual and virtual crank angles.

Knowledgeable AIDA associates, including local, Mexico-based personnel, will be available to demonstrate both presses and the Allen-Bradley servo press control, share their features and benefits, explain the advantages AIDA’s top quality presses can bring to any pressroom, and discuss AIDA’s full metal forming equipment line-up.

www.aida-global.com

Subscribe to learn the latest in manufacturing.

Subscribe to learn the latest in manufacturing.

Calendar & Events
Design-2-Part Show
March 13 - 14, 2024
Irving, TX
NASCC: The Steel Conference
March 20 - 22, 2024
San Antonio, Texas
Design-2-Part Show
March 27 - 28, 2024
Atlanta, GA
Design-2-Part Show
April 10 - 11, 2024
Santa Clara, CA
International Manufacturing Technology Show (IMTS)
September 9 - 14, 2024
Chicago, IL
FABTECH 2024
October 15 - 17, 2024
Orlando, FL
Advertisement
Advertisement
Advertisement
Advertisement