Tooling & Workholding
Filter by Process Zone:
PRECISION CUTTER FOR GEAR MILLING
The CoroMill 170 cutter from Sandvik Coromant can minimize machining times and the need for subsequent operations for slewing rings for windmills, cranes and other heavy equipment, as well as planetary gears.
SOLID CARBIDE CUTTERS FOR ALUMINUM, STAINLESS STEEL
Seco Tools JHP490 and JHP760 machining cutters for aluminum and stainless achieve material removal rates of up to 400 percent higher as compared to conventional machining.
CUTTING TOOL GUIDE DETAILS APPLICATIONS AND SOLUTIONS
The CoroKey guide from Sandvik Coromant is designed to help manufacturers quickly and easily identify the best tool combination and appropriate cutting data for any given application.
SLITTER BLADES CONVERT METAL ROLLS INTO VALUE ADDED PRODUCTS QUICKLY AND RELIABLY
Hyde IBS Slitter Blades are engineered for longer runs and designed to outperform competitive blades.
END MILLS FOR DENTAL MACHINING APPLICATIONS
These milling tools from Emuge Corp. feature carbide construction, cutting geometries and coatings that have been engineered specifically for use with today’s dental materials.
TUNGSTEN CARBIDE CLADDING FOR CAST IRON COMPONENTS
Kennametal Conforma Clad extends the life of high-wear industrial components such as coal-burner nozzles and popcorn screens used in power plants.
MP GEOMETRY GRADE IMPROVES TITANIUM TURNING SPEED UP TO 50 PERCENT
The Beyond grade KCS10 from Kennametal can increase speeds from 275 sfm to 335 sfm to get parts off faster and increase machine capacity, or run at lower speeds and extend tool life with superior results in quality and surface finish.
EXPERTLY CUT CURVES IN STEEL WITH CIRCULAR SAW BLADE
The same contoured shape of the Arcus wood and masonry blades to cut circles and curves in wood and has progressed to the metalworking industry.
LOW-TORQUE, HIGH METAL-REMOVAL RATE FOR TITANIUM ROUGHING
CYCLO CUT Max-Flute high-performance end mills from MAG machine internal structures in titanium, Inconel and stainless steel components with removal rates of up to 8 cu in min with only 25 ft-lb of torque.
BUTTON CUTTER PERFORMANCE ENHANCED WITH NEW RHINO-CARB INSERTS
DAPRA offers RHINO-CARB RPMH button inserts in 3/8-in, 1/2-in, 5/8-in and 3/4-in IC, with either a T-land or dished-face edge. These round inserts are also great for pocketing, semi-finishing and face milling
HELICAL CUTTING EDGE BALL NOSE INSERTS AVAILABLE IN METRIC SIZES
Dapra Corporation now offers its advanced HBN ball nose inserts with helical cutting edge in sizes ranging from 10 mm to 32 mm in diameter.
TRIPLE ID TOOL HOLDER INCREASES MACHINING CAPACITY
With the GenBore triple tool holder from GenSwiss, ID work can be expanded to include spotting, boring or drilling, all from one position for more cost-effective machining of complex parts.